LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2007 >> Explorer 4.6 8, 4WD >> Repair and Diagnosis >> Body & Frame >> Frames, Subframes & Crossmembers >> Full Frame And Body Mounting >> General Procedures >> Drilling Precautions

Drilling Precautions

  1. If a hole must be drilled in the frame, make sure the hole meets the following requirements:
    • The hole is at least the specified distance from the edge of the nearest hole.
    • The edge of the drilled hole is at least the specified distance from the edge of the flange.
    • The hole is at least the specified distance above the frame centerline.
    • The drilled hole is at least the specified distance from any other existing bracket or component of the frame.
    2. Fig 1: Identifying Drilling Hole Distance With Specifications
    GF0002309Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals