LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2007 >> Explorer 4.0 E, RWD >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine System - General Information >> General Procedures >> Connecting Rod Bend

Connecting Rod Bend

NOTE: Refer to SPECIFICATIONS .
  1. Measure the connecting rod bend on a suitable alignment fixture. Follow the instructions of the fixture manufacturer. Verify the bend measurement is within specification.
    2. Fig 1: Measuring Connecting Rod Bend
    GF0000198Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals