LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2007 >> Expedition RWD >> Repair and Diagnosis >> Electrical >> Starter >> Starting System >> Removal And Installation >> Starter Motor >> Removal

Starter Motor: Removal

WARNING: Always disconnect the battery ground cable at the battery before disconnecting the starter motor battery terminal lead. If a tool is shorted at the starter motor battery terminal, the tool can quickly heat enough to cause a skin burn. Failure to follow this instruction may result in serious personal injury.
  1. With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to JACKING AND LIFTING article.
  2. Disconnect the battery ground cable. For additional information, refer to BATTERY, MOUNTING AND CABLES article.
  3. Remove the starter terminal cover and remove the nut and the solenoid S-terminal electrical connection.
  4. Remove the nut and the solenoid B-terminal electrical connection.
  5. Remove the nut and the starter battery ground cable from the stud.
  6. Remove the 2 bolts, the stud bolt and the starter motor.
scientia non olet · About LEMON Manuals