LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2007 >> Expedition EL RWD >> Repair and Diagnosis >> Heating, Ventilation & A/C (HVAC) >> HVAC Control Systems >> Climate Control >> Removal And Installation >> In-Vehicle Temperature and Humidity Sensor >> Removal And Installation

Removal And Installation

  1. Remove the 3 lower steering column cover screws and the lower steering column cover.
    • Disconnect the electrical connector.
  2. Remove the 4 steering column reinforcement bolts and position the steering column reinforcement aside.
    • To install, tighten to 9 Nm (80 lb-in).
  3. Remove the in-vehicle temperature and humidity sensor.
    1. Detach the in-vehicle temperature and humidity sensor from the instrument panel finish panel.
    2. Disconnect the aspirator hose.
    3. Disconnect the in-vehicle temperature and humidity sensor electrical connector.
  4. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals