LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2007 >> Escape Base, 2.3 Z, 4WD, Automatic >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission - Cd4E >> Disassembly And Assembly Of Subassemblies >> Final Drive Carrier and Differential Assembly >> Assembly

Final Drive Carrier and Differential Assembly: Assembly

  1. Install the differential side gears and thrust washers.
    2. Fig 1: Identifying Differential Side Gears & Differential Side Gear Thrust Washers
    GF0024958Courtesy of FORD MOTOR CO.
  2. Install the differential pinion gears and thrust washers.
    • Rotate the differential pinion gears 90 degrees.
    3. Fig 2: Locating Differential Pinion Gears & Thrust Washers
    GF0024957Courtesy of FORD MOTOR CO.
  3. Install the differential pinion shaft.
    1. Push the pinion shaft in place.
    2. Install the roll pin.
    4. Fig 3: Identifying Differential Pinion Shaft & Roll Pin
    GF0024960Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals