Window Glass Adjustment
- Remove the front door trim panel. For additional information, refer to INTERIOR TRIM AND ORNAMENTATION
article.
Courtesy of FORD MOTOR CO.
- Loosen, but do not remove, the window regulator bracket upper nuts.
Courtesy of FORD MOTOR CO.
- Raise the front door window glass to the full up position.
- Tighten the nuts to 12 Nm (9 lb-ft).
Courtesy of FORD MOTOR CO.
- Loosen, but do not remove, the rear glass channel bolt.
- Partially lower the front door window glass to allow adjustment.
Courtesy of FORD MOTOR CO.
- Move the front door window glass to the rearward position.
- Tighten the bolt to 12 Nm (9 lb-ft).