LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2007 >> Cutaway 6.0 P >> Repair and Diagnosis >> Suspension >> Wheel Alignment >> Suspension System - General Information >> General Procedures >> Toe Adjustment

Toe Adjustment

  1. Start the engine and center the steering wheel.
  2. Turn the engine off and, using a suitable steering wheel holding device, lock the steering wheel in the straight-ahead position.
    3. Fig 1: Steering Linkage Adjusting Sleeve Nuts
    GF0012100Courtesy of FORD MOTOR CO.
  3. Loosen the steering linkage adjusting sleeve nuts.
  4. Rotate the adjusting sleeves to obtain the correct toe setting.
    5. Fig 2: Positioning Adjusting Sleeve Clamp
    GF0006096Courtesy of FORD MOTOR CO.
  5. Position both adjusting sleeve clamp openings downward within 45 degrees of vertical. Tighten the nuts to 55 Nm (41 lb-ft).
  6. Verify the toe settings and adjust as necessary.
scientia non olet · About LEMON Manuals