LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2007 >> Crown Victoria Police Interceptor >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission >> In-Vehicle Servicing >> Reverse Servo Assembly >> Removal

Reverse Servo Assembly: Removal

    WARNING: Before servicing a vehicle equipped with a fire suppression system, depower the system by following the procedure in FIRE SUPPRESSION SYSTEM article. Failure to follow the instructions may result in serious personal injury.
  1. Remove the main control valve body. For additional information, refer to Main Control Valve Body .
  2. Using the special tool, remove the reverse band servo retaining ring.
    1. Compress the servo spring.
    2. Remove the reverse band servo retaining ring.
    3. Fig 1: Removing Reverse Band Servo Retaining Ring Using Special Tool
    GF0003519Courtesy of FORD MOTOR CO.
  3. Remove the reverse servo assembly.
    1. Remove the reverse band servo cover.
    2. Remove the reverse band servo piston and rod.
    3. Remove the reverse band servo spring.
    4. Fig 2: Removing Reverse Servo Assembly
    GF0003520Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals