LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2007 >> Crown Victoria Police Interceptor >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission >> Disassembly And Assembly Of Subassemblies >> Reverse Clutch >> Disassembly

Reverse Clutch: Disassembly

  1. Remove the No. 2 forward clutch bearing.
    2. Fig 1: Identifying No. 2 Forward Clutch Bearing
    GF0003623Courtesy of FORD MOTOR CO.
  2. Remove the reverse clutch selective retaining ring.
    3. Fig 2: Locating Reverse Clutch Pressure Plate Retainer Snap Ring
    GF0003624Courtesy of FORD MOTOR CO.
  3. Remove the reverse clutch pack.
    4. Fig 3: Locating Reverse Clutch Pack
    GF0003625Courtesy of FORD MOTOR CO.
  4. Using the special tools, compress the reverse clutch piston spring.
    5. Fig 4: Compressing Reverse Clutch Piston Spring Using Special Tools
    GF0003626Courtesy of FORD MOTOR CO.
  5. Remove the reverse clutch piston spring retaining ring.
    6. Fig 5: Locating Reverse Clutch Piston Spring Retaining Ring
    GF0003627Courtesy of FORD MOTOR CO.
  6. Remove the reverse clutch piston spring pressure ring.
    1. Remove the reverse clutch piston spring.
    2. Remove the reverse clutch piston spring pressure ring.
    7. Fig 6: Identifying Reverse Clutch Piston Spring Pressure Ring
    GF0003628Courtesy of FORD MOTOR CO.
    NOTE: To ease reverse clutch piston removal, it may be necessary to apply air pressure to the reverse clutch drum. Block the opposite hole.
  7. Remove the reverse clutch piston.
    8. Fig 7: Locating Reverse Clutch Drum Hole
    G03929960Courtesy of FORD MOTOR CO.
  8. Remove the reverse clutch piston inner and outer seals.
    9. Fig 8: Locating Reverse Clutch Piston Inner And Outer Seals
    G03929951Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals