LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2006 >> Taurus SE, 3.0 2 >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission >> In-Vehicle Repair >> Transaxle Support Insulator >> Removal

Transaxle Support Insulator: Removal

  1. With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to JACKING AND LIFTING .
  2. Remove the LH wheel and tire. For additional information, refer to WHEELS AND TIRES .
  3. Place the high-lift transmission jack under the transaxle.
    Fig 1: Supporting High-Lift Transmission Jack Under Transaxle
    G04709919Courtesy of FORD MOTOR CO.
  4. Remove the LH transaxle upper support insulator nut.
    Fig 2: Locating LH Transaxle Upper Support Insulator Nut
    G04709920Courtesy of FORD MOTOR CO.
  5. Remove the engine and transaxle upper support bracket bolts and bracket.
    Fig 3: Locating Transaxle Upper Support Bracket Bolts And Bracket
    G04709921Courtesy of FORD MOTOR CO.
  6. Remove the engine and transaxle upper support insulator bolts and insulator.
    Fig 4: Locating Transaxle Upper Support Insulator Bolts
    G04709922Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals