LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2006 >> Taurus SE, 3.0 2 >> Repair and Diagnosis >> Steering >> Power Steering >> Power Steering System >> Removal And Installation >> Power Steering Pump >> Removal

Power Steering Pump: Removal

  1. Rotate the tensioner clockwise and remove the belt from the power steering pump pulley.
  2. Loosen the fitting and disconnect the power steering pressure (PSP) line.
  3. Disconnect the electrical connector.
    Fig 1: Locating Electrical Connector
    G04708779Courtesy of FORD MOTOR CO.
  4. Disconnect the power steering return hose.
  5. Using the special tool, remove the power steering pump pulley.
    Fig 2: Identifying Special Tool (211-016) Onto Power Steering Pump Pulley
    G04708780Courtesy of FORD MOTOR CO.
  6. Remove the 3 power steering pump mounting bolts and the power steering pump.
scientia non olet · About LEMON Manuals