Transmission Range (TR) Sensor Adjustment: Adjust

With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to JACKING & LIFTING .
Disconnect the shift cable from the manual control lever.

Fig 1: Locating Shift Cable Eyelet At Manual Control Lever
Loosen the screws.

Fig 2: Locating Digital TR Sensor Screws

CAUTION: Tightening one screw before tightening the other may cause the sensor to bind or become damaged.

NOTE: The manual lever must be in the NEUTRAL position.
Using the special tool, align the digital TR sensor and tighten the screws in an alternating sequence.
- Tighten 8 Nm (71 lb-in).
  
  Fig 3: Identifying Special Tool On Digital TR Sensor
Install the shift cable to the manual control lever.

Fig 4: Locating Transmission Shift Cable At Manual Control Lever
Verify that the shift cable is adjusted correctly. For additional information, refer to AUTOMATIC TRANSAXLE/TRANSMISSION EXTERNAL CONTROLS .