LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2006 >> Freestar Base >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission >> Disassembly And Assembly Of Subassemblies >> Drive Sprocket/Turbine Shaft >> Assembly

Drive Sprocket/Turbine Shaft: Assembly

  1. Make sure that the seals are mated correctly.
    Fig 1: Identifying Seal Ring Mating
    G04661394Courtesy of FORD MOTOR CO.
  2. Install the drive sprocket/turbine shaft seal and O-ring.
    • Install the drive sprocket/turbine shaft O-ring.
    • Install the drive sprocket/turbine shaft seal.
      Fig 2: Locating Drive Sprocket/Turbine Shaft Seal And O-Ring
      G04661395Courtesy of FORD MOTOR CO.
  3. Install the turbine shaft front seal.
    Fig 3: Locating Turbine Shaft Front Seal
    G04661396Courtesy of FORD MOTOR CO.
  4. Make sure that the seal is locked correctly.
    Fig 4: Identifying Seal Locked Position
    G04661397Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals