LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2006 >> Freestar Base >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine >> In-Vehicle Repair >> Exhaust Manifold - LH >> Installation

Exhaust Manifold - LH: Installation

  1. Install a new LH exhaust manifold gasket.
  2. Install the LH exhaust manifold and the 6 nuts.
    • Tighten to 25 Nm (18 lb-ft) in the sequence shown.
      Fig 1: Identifying LH Exhaust Manifold Nuts Tightening Sequence
      G04660413Courtesy of FORD MOTOR CO.
  3. Connect the EGR tube to the exhaust manifold.
    • Tighten to 40 Nm (30 lb-ft).
      Fig 2: Locating EGR Tube
      G04660414Courtesy of FORD MOTOR CO.
  4. Install the oil level indicator tube bolt.
    • Tighten to 10 Nm (89 lb-in).
  5. Install the dual converter Y-pipe. For additional information, refer to EXHAUST SYSTEM .
scientia non olet · About LEMON Manuals