LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2006 >> Freestar Base >> Repair and Diagnosis >> Accessories & Equipment >> Cruise Control Systems >> Removal And Installation >> Speed Control Cable >> Removal

Speed Control Cable: Removal

  1. Remove the air cleaner assembly. For additional information, refer to INTAKE AIR DISTRIBUTION AND FILTERING .
  2. Disconnect the speed control cable from the throttle lever end.
  3. Remove the speed control cable from the throttle bracket.
  4. Disconnect the speed control cable from the speed control actuator.
    1. Press the locking tab.
    2. Rotate the speed control cable cap counterclockwise.
      Fig 1: Identifying Speed Control Cable Cap And Locking Tab
      G04661909Courtesy of FORD MOTOR CO.
  5. Disconnect the speed control cable from the speed control actuator pulley.
    1. Gently push the retaining spring.
    2. Disconnect the speed control cable slug from the speed control actuator pulley.
      Fig 2: Disconnecting Speed Control Cable Slug
      G04661910Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals