- The shift interlock system does not release/lock correctly
|
- Circuitry
- Fuse(s):
- Shift lock actuator
- Brake pedal position switch
|
|
- The selector is lever out of correct gear relationship
|
- Transmission selector lever cable and bracket
- Retainer bracket
- Selector lever control linkage
|
|
- Transmission range indicator does not correspond to the gear
|
- Transmission selector lever cable bracket
|
- TIGHTEN the bolts holding transmission selector lever cable bracket.
|
- Transmission selector lever cable loose from the transmission retainer bracket
|
- TIGHTEN transmission selector lever cable.
|
|
|
|
- The transmission control switch (TCS) is inoperative
|
- Fuse F20 (10A)
- TCS
- TCS not cycled during self-test
- Powertrain control module
- Circuitry
|
|
- The transmission control indicator lamp (TCIL) is not operating correctly
|
- Bulb
- Circuitry
- Powertrain control module
|
|
- Rattle, buzz or other noise
|
|
|
|
|
|
- Water enters inside the vehicle
|
|
- SECURE grommet to floor panel.
|
- Transmission cover plate gasket
|
- SECURE transmission cover plate to floor or INSTALL a new transmission cover plate.
|
- Torn cable assembly grommet
|
|
|
|
- Transmission selector lever cable
|
|
|
|
- Route cable to prevent binding.
|
|
|
- ADJUST the selector lever cable. TIGHTEN cable bracket screws.
|
- Transmission selector lever will not shift
|
- Transmission selector lever cable
|
|
- Transmission manual lever jammed
|
- INSTALL a new manual lever.
|
|
|
|
- Broken transmission selector lever
|
|