LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2006 >> Explorer 4.0 E, RWD >> Repair and Diagnosis >> Engine Mechanical >> Fuel System >> Fuel Charging System & Control System - 4.0L SOHC >> Removal And Installation >> Fuel Pump Driver Module (FPDM) >> Removal and Installation

Removal and Installation

  1. Remove the RH rear quarter trim panel. For additional information, refer to INTERIOR TRIM AND ORNAMENTATION .
  2. Disconnect the fuel pump driver module (FPDM) electrical connector.
  3. Remove the bolts and the FPDM.
    • To install, tighten to 10 Nm (89 lb-in).
  4. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals