LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2006 >> Expedition 4WD >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission >> In-Vehicle Repair >> 1-2 Accumulator >> Removal

1-2 Accumulator: Removal

  1. With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to JACKING & LIFTING 2005JACKING & LIFTING 2006 .
  2. Drain transmission fluid and remove the transmission fluid pan and filter. For additional information, refer to FLUID PAN, GASKET AND FILTER .
  3. Compress the 1-2 accumulator piston and remove the accumulator piston retaining ring.
    Fig 1: Locating Accumulator Piston Retaining Ring
    G03888654Courtesy of FORD MOTOR CO.
  4. Remove the 1-2 shift accumulator assembly.
    1. Remove the 1-2 accumulator cover.
    2. Remove the inner and outer 1-2 accumulator springs.
    3. Remove the 1-2 accumulator piston.
    4. Remove the 1-2 accumulator upper spring.
      Fig 2: Identifying 1-2 Accumulator Upper Spring
      G04628341Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals