Transmission Support CROSSMEMBER: Installation

Position the crossmember to the transmission mount and loosely install the nut.

Fig 1: Locating Crossmember To Transmission Mount Nut
Courtesy of FORD MOTOR CO.
Install the LH crossmember bracket.

Fig 2: Locating LH Crossmember Bracket
Courtesy of FORD MOTOR CO.
Install the LH crossmember bracket nuts
- Tighten to 81 Nm (60 lb-ft).
  
  Fig 3: Identifying LH Crossmember Nuts
  Courtesy of FORD MOTOR CO.
Install the RH crossmember bracket.

Fig 4: Identifying RH Crossmember Bracket
Courtesy of FORD MOTOR CO.
Install the RH crossmember bracket nuts
- Tighten to 81 Nm (60 lb-ft).
  
  Fig 5: Identifying RH Crossmember Nuts
  Courtesy of FORD MOTOR CO.
Tighten the rear insulator nuts to 94 Nm (69 lb-ft).

Fig 6: Identifying Transmission Support Insulator Nuts
Courtesy of FORD MOTOR CO.
Install the wire harness and install the 2 retaining clips to the rear of the crossmember.

Fig 7: Identifying Wire Harness Retaining Clips
Courtesy of FORD MOTOR CO.