LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2006 >> Crown Victoria Police Interceptor >> Repair and Diagnosis >> Engine Performance >> Fuel Delivery >> Fuel System-General Information >> General Procedures >> Fuel Tank Draining

Fuel Tank Draining

SPECIAL TOOLS DESCRIPTION

G04584924
Fuel Storage Tanker
164-R3202 or equivalent
WARNING: Do not smoke or carry lighted tobacco or open flame of any type when working on or near any fuel-related components. Highly flammable mixtures are always present and may be ignited. Failure to follow these instructions can result in personal injury.
WARNING: Do not carry personal electronic devices such as cell phones, pagers or audio equipment of any type when working on or near any fuel-related components. Highly flammable mixtures are always present and may be ignited. Failure to follow these instructions can result in personal injury.
WARNING: This procedure involves fuel handling. Be prepared for fuel spillage at all times and always observe fuel handling precautions. Failure to follow these instructions can result in personal injury.
NOTE: The fuel tank filler pipe must be removed for fuel tank draining due to the installation of a spark arrestor internally mounted in the fuel tank filler pipe. This will not allow a drain tube to pass into the fuel tank for draining purposes.
  1. Remove the fuel tank filler pipe. For additional information, refer to FUEL TANK & LINES .
  2. Insert a suitable fuel drain tube into the fuel tank.
    Fig 1: Inserting Suitable Fuel Drain Tube Into Fuel Tank
    G04584925Courtesy of FORD MOTOR CO.
  3. Attach the fuel storage tanker to the fuel drain tube and extract the fuel from the fuel tank.