LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2006 >> Crown Victoria LX, 4.6 V >> Repair and Diagnosis >> Body & Frame >> Seats >> Seat System >> Removal And Installation >> Heated Seat Module >> Installation

Heated Seat Module: Installation

  1. Install the heated seat module in the mounting bracket. Verify that the locking tab is correctly seated.
    Fig 1: Installing Heated Seat Module In Mounting Bracket
    G04585981Courtesy of FORD MOTOR CO.
  2. Connect the heated seat module electrical connector.
    Fig 2: Connecting Heated Seat Module Electrical Connector
    G04585982Courtesy of FORD MOTOR CO.
  3. Install the affected seat. For additional information, refer to SEAT - FRONT .
  4. Repower the SRS. For additional information, refer to SUPPLEMENTAL RESTRAINT SYSTEM (SRS) DEPOWERING AND REPOWERING in the General Procedures.
scientia non olet · About LEMON Manuals