Removal and Installation

With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to JACKING & LIFTING .
Remove the catalytic converter. For additional information, refer to EXHAUST SYSTEM .
Support the transmission with a transmission jack.
Remove the rear transmission mount outer screws.
- To install, tighten to 55 Nm (41 lb-ft).
  
  Fig 1: Removing Rear Transmission Mount Outer Screws
  Courtesy of FORD MOTOR CO.
Remove the rear transmission mount center screw.
- To install, tighten to 40 Nm (31 lb-ft).
  
  Fig 2: Removing Rear Transmission Mount Center Screw
  Courtesy of FORD MOTOR CO.
Remove the rear transmission mount.
To install, reverse the removal procedure.