LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2005 >> Mustang Base, 2D Convertible, Automatic >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission External Controls >> Removal And Installation >> Selector Lever Knob >> Removal

Selector Lever Knob: Removal

  1. Remove the transmission selector lever assembly. For additional information, refer to SELECTOR LEVER .
  2. With the shift selector knob pulled to the rear, remove the screw from the knob base.
    Fig 1: Removing Screw
    G03985643Courtesy of FORD MOTOR CO.
  3. Slide the knob up and off the selector shaft. Disconnect the transmission control electrical connector.
scientia non olet · About LEMON Manuals