LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2005 >> Mustang Base, 2D Convertible, Automatic >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission Cooling >> Removal And Installation >> Transmission Fluid Cooler >> Installation

Transmission Fluid Cooler: Installation

  1. Position the transmission fluid cooler in the retaining pockets.
  2. Install the transmission fluid cooler screws.
    • Tighten to 10 Nm (89 lb-in).
  3. Connect the transmission fluid cooler hoses to the cooler.
  4. Install new transmission cooler-to-hose clamps.
  5. Fill the transmission with fluid and verify correct operation.
  6. Install the lower air deflector.
scientia non olet · About LEMON Manuals