LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2005 >> Mustang Base, 2D Convertible, Automatic >> Repair and Diagnosis >> Brakes >> Traction Control >> Anti-Lock Brake System >> Removal And Installation >> Wheel Speed Sensor - Front >> Removal and Installation

Removal and Installation

  1. With the vehicle in NEUTRAL, place it on a hoist. For additional information, refer to JACKING & LIFTING .
  2. Disconnect the wheel speed sensor electrical connector.
  3. Disconnect the 3 wheel speed sensor harness pin-type retainers.
  4. Disconnect the 2 wheel speed sensor grommet retainers from the brake hose clips.
  5. Remove the wheel speed sensor bolt.
    • To install, tighten to 15 Nm (11 lb-ft).
  6. Remove the wheel speed sensor and harness assembly.
  7. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals