DTC P060A: Internal Control Module Monitoring Processor Performance
WARNING: This page does not describe the selected car, but rather 32 other vehicles, including the 2005 Mercury Sable, 2005 Mercury Mountaineer, 2005 Mercury Monterey, 2005 Mercury Montego, and 2005 Mercury Mariner. However, it is still accessible from the selected car via links, so may be relevant.
P060A - INTERNAL CONTROL MODULE MONITORING PROCESSOR PERFORMANCE
| Description: | Indicates an error occurred in the powertrain control module (PCM). This DTC is set in combination with P2105. | ||
| Possible Causes: |
|
||
| Diagnostic Aids: | Program the PCM to the latest calibration. Cycle the key off and on. Check for self-test DTCs. If the concern or DTC is still present, install a new PCM. Refer to FLASH ELECTRICALLY ERASABLE PROGRAMMABLE READ ONLY MEMORY (EEPROM) . |
||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| All | Refer to the Description, Possible Causes and Diagnostic Aids for the DTC. | ||