LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2005 >> GT >> Repair and Diagnosis >> External Pages >> Different car >> Section 15 (Engine Controls - Powertrain DTC Charts & Description (Except Diesel & Hybrid)) >> Diagnostic Trouble Code (DTC) Charts And Descriptions >> DTC P0602: Control Module Programming Error

DTC P0602: Control Module Programming Error

WARNING: This page does not describe the selected car, but rather 32 other vehicles, including the 2005 Mercury Sable, 2005 Mercury Mountaineer, 2005 Mercury Monterey, 2005 Mercury Montego, and 2005 Mercury Mariner. However, it is still accessible from the selected car via links, so may be relevant.
P0602 - CONTROL MODULE PROGRAMMING ERROR

Description:  This DTC indicates a programming error within the vehicle ID (VID) block.
Possible Causes: 
  • VID data corrupted by the diagnostic tool during VID reprogramming
Diagnostic Aids:  Using the diagnostic tool, reprogram the VID block. If the powertrain control module (PCM) does not allow reprogramming of the VID block, reprogram the PCM.
Application  Key On Engine Off  Key On Engine Running  Continuous Memory 
All The vehicle identification (VID) block must programmed. For instructions, refer to MAKING CHANGES TO THE VID BLOCK .
scientia non olet · About LEMON Manuals