LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2005 >> Freestar Base >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine System-General Information >> General Procedures >> Push Rods - Inspection

Push Rods - Inspection

    CAUTION: Do not attempt to straighten push rods.
    Fig 1: Inspecting Push Rod
    G03954898Courtesy of FORD MOTOR CO.
  1. Check the ends of the push rods for nicks, grooves, roughness or excessive wear. Install new push rods as necessary. Refer to ENGINE - 3.9L AND 4.2L article for the procedure.
    • The push rods can be checked for straightness while they are installed in the engine by rotating them with the valve closed.
    • They also can be checked using a Dial Indicator with Bracketry.
  2. If the push rod is bent beyond specifications, install a new push rod. Refer to ENGINE - 3.9L AND 4.2L article for the procedure.
scientia non olet · About LEMON Manuals