- The clock operation is erratic/inoperative
|
|
- DISCONNECT the clock C2016. CHECK the voltage between the clock C2016-6, circuit 1111 (VT), harness side and ground.
- CHECK the resistance between the clock C2016-5, circuit 1205 (BK), harness side and ground.
- If the voltage is greater than 10 volts on circuit 1111 (VT) and the resistance is less than 5 ohms on circuit 1205 (BK), INSTALL a new clock. REFER to CLOCK . If the voltage on circuit 1111 (VT) is less than 10 volts and the resistance is greater than 5 ohms on circuit 1205 (BK), REPAIR the circuit in question.
|