Solenoid Body Assembly: Removal

Raise and support the vehicle. For additional information, refer to JACKING AND LIFTING .
Remove the drain plug and drain the fluid.

Fig 1: Identifying Fluid Drain Plug
Courtesy of FORD MOTOR CO.

NOTE: Clean the area around connector to prevent contamination of the solenoid body connector.

Fig 2: Identifying Solenoid Body Electrical Connector

Courtesy of FORD MOTOR CO.

NOTE: The transmission fluid pan gasket is reusable, clean and inspect for damage. If not damaged, the gasket should be reused.

Fig 3: Identifying Transmission Fluid Pan And Gasket

Courtesy of FORD MOTOR CO.

Remove the 16 transmission fluid pan screws, fluid pan and gasket.
Remove the transmission fluid filter.

Fig 4: Identifying Transmission Fluid Filter Mounting Screws
Courtesy of FORD MOTOR CO.
Remove the solenoid body.

Fig 5: Locating Solenoid Body Mounting Screws
Courtesy of FORD MOTOR CO.