LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2005 >> Expedition RWD >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission >> In-Vehicle Repair >> Transmission Insulator and Retainer >> Removal

Transmission Insulator and Retainer: Removal

  1. With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to JACKING & LIFTING 2005JACKING & LIFTING 2006 .
  2. If equipped, remove the transfer case skid plate.
  3. Remove the rear transmission insulator nuts.
    Fig 1: Locating Rear Transmission Insulator Nuts
    G04628347Courtesy of FORD MOTOR CO.
  4. Install a suitable transmission jack.
  5. Slightly raise the rear of the transmission and remove the bolts. Remove the rear transmission insulator.
    Fig 2: Locating Rear Transmission Insulator Bolts
    G04628348Courtesy of FORD MOTOR CO.