Programming Memory Seat Positions

A power driver seat position can be stored at any time. The driver must move the seat to the desired position using the driver seat switch assembly. The driver must then depress the memory SET switch which activates the memory SET switch light emitting diode (LED) (if equipped). Within 5 seconds (before the LED goes out, if equipped), the driver must select a memory position. Memory 1 is selected by depressing memory switch 1. Memory 2 is selected by depressing memory switch 2.
If no memory switch input is received within the 5-second time limit, the operation is aborted and the memory SET switch LED is turned off (if equipped). If 1 of the following inputs is received during the 5-second programming limit, the operation is aborted and the memory SET switch LED is turned off (if equipped):