Transmission Insulator and Retainer: Installation

Install the transmission insulator and the bolts.
- Tighten to 80 N.m (59 lb-ft).
  
  Fig 1: Locating Rear Transmission Insulator Bolts
  Courtesy of FORD MOTOR CO.
Lower the transmission onto the crossmember and install the nuts.
- Tighten to 103 N.m (76 lb-ft).
  
  Fig 2: Locating Crossmember Bolts
  Courtesy of FORD MOTOR CO.
If equipped, install the transfer case skid plate.
- Tighten to 48 N.m (35 lb-ft).