LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2005 >> Excursion 6.8 S, RWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 6 (Automatic Transmission - 5R110W) >> Disassembly And Assembly Of Subassemblies >> Center Support >> Assembly

Center Support: Assembly

WARNING: This page is about a different variant/trim than selected.
  1. Follow the disassembly procedure in reverse order.
    • Lightly lubricate the thrust washer with petroleum jelly to hold it in place during assembly.
    • Install new seals.
  2. After the center support is completely assembled, apply 231 kPa (20 psi) of air to the port and verify the function of the piston.
    Fig 1: Applying Air To Port And Verify Function Of Piston
    G03889428Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals