LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2005 >> Excursion 6.0 P, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 249 (Engine Ignition System) >> Removal And Installation >> Ignition Coil-On-Plug >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2006 Mercury Grand Marquis and 2006 Ford Crown Victoria. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the negative battery cable. For additional information, refer to BATTERY, MOUNTING AND CABLES .
  2. Remove the air cleaner outlet pipe. For additional information, refer to INTAKE AIR DISTRIBUTION & FILTERING .
  3. Disconnect the electrical connector from the ignition coil-on-plug.
  4. Remove the bolt from the ignition coil-on-plug.
    • To install, tighten to 10 Nm (89 lb-in).
  5. Remove the ignition coil-on-plug.
  6. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals