- Vehicle sensitive (emergency locking retractor) mode - occupant restraint system is inoperative
|
- Front safety belt retractor and tongue.
- Rear safety belt retractor and tongue.
|
- CARRY OUT the necessary Functional Tests in this article. INSTALL a new safety belt retractor, if necessary.
|
- Automatic locking retractor (ARL) mode - occupant restraint system is inoperative
|
- Front outboard passenger safety belt retractor and tongue.
- Rear safety belt retractor and tongue.
|
- CARRY OUT the necessary Functional Tests in this article. INSTALL a new safety belt retractor, if necessary.
|
- The safety belt warning indicator lamp does not operate, the safety belt warning chime is OK
|
- Burned-out bulb.
- Circuitry.
- Instrument cluster module.
|
|
- The safety belt warning chime does not operate, the safety belt warning indicator lamp is OK
|
- Circuitry.
- Instrument cluster module.
|
|
- Neither the safety belt warning chime nor the safety belt warning indicator lamp operates
|
- Safety belt switch.
- Instrument cluster module.
- Restraints control module (RCM).
- Circuitry.
|
|
- Excessive pressure on the occupant during normal wear, the webbing cannot be extracted, excessive slack in webbing does not retract
|
- Front safety belt retractor and tongue.
- Rear safety belt retractor and tongue.
|
- CARRY out the necessary Functional Tests in this article. INSTALL a new retractor, if necessary.
|