LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2005 >> Crown Victoria Special Edition >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine System >> In-Vehicle Repair >> Valve Seals >> Installation

Valve Seals: Installation

    NOTE: The valve stem seal must be bottomed on the valve seat.
    NOTE: Make sure that the garter spring is present in the valve stem seal.
    Fig 1: Installing Valve Stem Seals
    G04001997Courtesy of FORD MOTOR CO.
  1. Use the special tools to install the valve stem seals.
  2. Install the valve springs. For additional information, refer to VALVE SPRINGS .
    3. WARNING: If equipped with fire suppression system, repower the system. For important safety warnings and procedures, refer to FIRE SUPPRESSION SYSTEM .
  3. If equipped with fire suppression system, repower the system.
scientia non olet · About LEMON Manuals