Inspection and Verification
WARNING:
If equipped with fire suppression system, refer to FIRE SUPPRESSION SYSTEM
for Important Safety Warnings.
WARNING:
When repairing starter motor or carrying out other underhood work in the vicinity of the starter motor, be aware that the heavy gauge battery input lead at the starter solenoid is "electrically hot" at all times. A new protective cap or boot, which is provided over the terminal of this lead must be installed after repairs. Be sure to disconnect battery ground cable before servicing starter.
WARNING:
When working in area of the starter motor, be careful to avoid touching hot exhaust components.
- Verify the customer concern by operating the starting system.
- Visually inspect for obvious signs of mechanical and electrical damage; refer to the following CHART .VISUAL INSPECTION CHART
Mechanical Electrical - Starter motor
- Battery
- Starter solenoid
- Fuse
- Brackets
- Damaged wiring harness
- Loose or corroded connections
- If the concern is not visually evident, determine the symptom. GO to SYMPTOM CHART .