LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2004 >> Ranger 2D Pickup, 3.0 U, RWD, Automatic >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Electronic Engine Control System >> Removal And Installation >> Powertrain Control Module (PCM) >> Removal and Installation

Removal and Installation

  1. Disconnect the battery ground cable. For additional information, refer to BATTERY, MOUNTING AND CABLES .
  2. Remove the powertrain control module (PCM) electrical connector.
    Fig 1: Removing PCM Electrical Connector
    G03275333Courtesy of FORD MOTOR CO.
  3. Remove the nuts and the PCM cover.
    Fig 2: Removing PCM Cover
    G03275334Courtesy of FORD MOTOR CO.
  4. Remove the PCM.
  5. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals