LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2004 >> Ranger 2D Pickup, 2.3 D, Automatic >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission >> In-Vehicle Repair >> Intermediate Shaft Speed Sensor >> Installation

Intermediate Shaft Speed Sensor: Installation

  1. Inspect and lubricate O-ring with petroleum jelly.
    1. Install the intermediate shaft speed sensor into the transmission.
    2. Tighten intermediate shaft speed sensor screw.
      Fig 1: Tightening Intermediate Shaft Speed Sensor Screw
      G03275480Courtesy of FORD MOTOR CO.
  2. Connect intermediate shaft speed sensor electrical connector.
    Fig 2: Connecting Intermediate Shaft Speed Sensor Electrical Connector
    G03275481Courtesy of FORD MOTOR CO.
  3. Lower the vehicle.
scientia non olet · About LEMON Manuals