LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2004 >> Mustang GT, 2D Convertible, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 10 (Automatic Transmission) >> In-Vehicle Repair >> 1-2 Accumulator >> Installation

1-2 Accumulator: Installation

WARNING: This page is about a different variant/trim than selected.
  1. Install the 1-2 accumulator.
    1. Install the 1-2 accumulator upper spring.
    2. Install the accumulator piston.
    3. Install the 1-2 accumulator lower spring.
    4. Install the cover and seal assembly.
    Fig 1: Installing 1-2 Accumulator Assembly
    G03241642Courtesy of FORD MOTOR CO.
  2. Compress the accumulator and install the accumulator piston retaining ring.
    Fig 2: Installing Accumulator Piston Retaining Ring
    G03241643Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals