LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2004 >> Freestar SES >> Repair and Diagnosis >> Transmission >> Automatic Transmission >> In-Vehicle Repair >> Output Shaft Speed (OSS) Sensor >> Removal And Installation

Removal And Installation

  1. Remove the catalytic converter. For additional information, refer to EXHAUST SYSTEM .
  2. Remove the parts in the order indicated in the following illustration and table.
    Fig 1: Output Shaft Speed (OSS) Sensor Removal Sequence
    G03244567Courtesy of FORD MOTOR CO.
  3. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals