Overhead Console On/Off Switch

The overhead console on/off switch enables or disables the B-pillar switch activation and power assist activation of the PSD. Both functions are enabled when the PSD detects ground on the on/off switch circuit. With the overhead console on/off switch in the ON position:

• a ground signal is supplied to the PSD.
• the B-pillar switches are enabled.
• power assist is enabled.

The overhead switch has an ignition feed through the SJB fuse 16 (5A). With the ignition in RUN and the on/off switch in the ON position, the LED next to the switch will illuminate. With the overhead console on/off switch in the OFF position, the ground is removed and the B-pillar switches and power assist will not operate. The ground for the overhead console switch assembly is shared by the overhead console open/close switches.