LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2004 >> Focus LX, 2.3 Z, Automatic >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 20 (Engine - SVT) >> In-Vehicle Repair >> Valve Springs >> Installation

Valve Springs: Installation

WARNING: This page is about a different variant/trim than selected.
    NOTE: Check that the valve collets are correctly seated.
    Fig 1: Inserting Valve Springs And Valve Spring Retainer
    G04034937Courtesy of FORD MOTOR CO.
  1. Install the valve springs.
    • Insert the valve springs and valve spring retainer.
    1. Compress the valve springs.
    2. Fit the valve collets.
    2. NOTE: Do not tighten yet.
  2. Detach special tool 303-363 and insert the spark plug.
  3. Repeat the operations for all the other cylinders.
  4. Coat the valve tappet with engine oil and insert it.
  5. Remove the camshafts. For additional information, refer to CAMSHAFTS .
scientia non olet · About LEMON Manuals