LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2004 >> Explorer 4.0 E, RWD >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine System-General Information >> General Procedures >> Valve - Stem Diameter

Valve - Stem Diameter

  1. Measure the diameter of each intake and exhaust valve stem at the points shown. Verify the diameter is within specification.
    • If out of specification, install new components as necessary.
    Fig 1: Measuring Diameter Of Each Intake And Exhaust Valve Stem
    G03180097Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals