LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2004 >> Explorer 4.0 E, RWD >> Repair and Diagnosis (Single Page) >> Heating, Ventilation & A/C (HVAC) >> A/C Compressor >> HVAC - Climate Control System >> General Procedures >> Spring Lock Coupling >> Connect

Spring Lock Coupling: Connect

  1. Install the spring lock coupling spring.
    Fig 1: Installing Spring Lock Coupling Spring
    G03182886Courtesy of FORD MOTOR CO.
  2. Lubricate the inside of the coupling with mineral oil.
    Fig 2: Lubricating Inside Of Coupling With Mineral Oil
    G03182887Courtesy of FORD MOTOR CO.
    3. CAUTION: Use only the new O-ring seals. The use of any O-ring seals other than those specified in the Ford Master Parts Catalog may result in intermittent leakage during vehicle operation.
    Fig 3: Lubricating O-Ring Seals With Mineral Oil
    G03182888Courtesy of FORD MOTOR CO.
  3. Install the O-ring seals.
    • Lubricate the O-ring seals with mineral oil.
  4. Connect the spring lock coupling fittings with a twisting motion until the spring lock coupling spring snaps over the flared end of the female fitting.
    Fig 4: Connecting Spring Lock Coupling Fittings
    G03182889Courtesy of FORD MOTOR CO.
  5. Install the spring lock coupling clip.
scientia non olet · About LEMON Manuals