LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2004 >> Explorer 4.0 E, RWD >> Repair and Diagnosis (Single Page) >> Heating, Ventilation & A/C (HVAC) >> A/C Compressor >> HVAC - Climate Control System >> Diagnosis And Testing >> Climate Control System >> Symptom Chart >> Notes

Symptom Chart: Notes

SYMPTOM CHART

Condition Possible Sources Action
  • The steering wheel control switch is inoperative/does not operate correctly
  • Circuitry short/open.
  • Steering wheel control switch.
  • DATC module.
  • No communication with the dual electronic automatic temperature control (DATC) module
  • Circuitry short/open.
  • DATC module communication network.
  • The DATC system is inoperative, intermittent or incorrect operation
  • Circuitry short/open.
  • Input sensor(s)/erratic input signals.
  • Automatic temperature control aspirator hose and elbow.
  • Incorrect/erratic direction of airflow from outlets - manual climate control
  • Function selector switch.
  • Vacuum hose.
  • A/C vacuum reservoir tank and check valve.
  • Vacuum control motor.
  • Vacuum actuator arm.
  • Mode door.
  • Incorrect/erratic direction of airflow from outlets - DATC
  • DATC module.
  • ATC solenoid and manifold assembly.
  • Vacuum hose.
  • A/C vacuum reservoir tank and check valve.
  • Vacuum control motor.
  • Vacuum actuator arm.
  • Mode door.
  • Insufficient, erratic, or no heat
  • Low engine coolant level.
  • Engine overheating.
  • Plugged or partially plugged heater core.
  • Temperature blend door is binding or stuck.
  • A/C electric blend door actuator.
  • Incorrect heater control valve operation.
  • Heater hose is kinked or binding.
  • The A/C is inoperative/does not operate correctly
  • Open fuse.
  • Circuitry short/open.
  • A/C system discharged/low charge.
  • A/C pressure cutoff switch.
  • A/C control.
  • Function selector switch.
  • A/C cycling switch.
  • A/C compressor clutch air gap.
  • A/C clutch relay.
  • The A/C is always on
  • Circuitry short.
  • A/C control.
  • A/C compressor clutch air gap.
  • A/C clutch relay.
  • The temperature control is inoperative/does not operate correctly - manual climate control
  • Temperature blend door actuator control.
  • Temperature blend door.
  • A/C electronic blend door actuator motor.
  • Circuitry open/shorted.
  • The blower motor is inoperative - manual climate control
  • Fuse.
  • Circuitry open/shorted.
  • A/C blower motor switch.
  • Blower motor relay.
  • A/C blower motor.
  • The blower motor does not operate correctly - manual climate control
  • Circuitry short.
  • A/C blower motor resistor.
  • A/C blower motor switch.
  • Blower motor high speed relay.
  • The blower motor is inoperative - DATC
  • Circuitry short/open.
  • Blower motor relay.
  • A/C blower motor.
  • A/C blower motor speed control.
  • The blower motor does not operate correctly - DATC
  • Circuitry short/open.
  • A/C blower motor speed control.
  • DATC module.
  • The auxiliary blower motor is inoperative
  • Fuse.
  • Circuitry short/open.
  • Auxiliary blower motor relay.
  • Auxiliary blower motor.
  • The auxiliary blower motor does not operate correctly using the front auxiliary climate controls
  • Fuse.
  • Circuitry short/open.
  • Auxiliary blower motor switch.
  • Auxiliary blower motor resistor.
  • The auxiliary blower motor does not operate correctly using the rear auxiliary climate controls
  • Fuse.
  • Circuitry short/open.
  • Auxiliary blower motor switch.
  • Auxiliary blower motor resistor.
  • The panel/floor control is inoperative using the front auxiliary climate controls
  • Fuse.
  • Circuitry short/open.
  • Front auxiliary control panel.
  • Auxiliary mode door actuator.
  • Mode door.
  • The panel/floor control is inoperative using the rear auxiliary climate controls
  • Fuse.
  • Circuitry short/open.
  • Rear auxiliary control panel.
  • Front auxiliary control panel.
  • The temperature control is inoperative using the front auxiliary climate controls
  • Fuse.
  • Circuitry short/open.
  • Front auxiliary control panel.
  • Auxiliary blend door actuator.
  • Temperature blend door.
  • The temperature control is inoperative using the rear auxiliary climate controls
  • Fuse.
  • Circuitry short/open.
  • Rear auxiliary control panel.
  • Front auxiliary control panel.
  • The panel/floor and cool/warm controls are inoperative using the front auxiliary climate controls
  • Fuse.
  • Circuitry short/open.
  • Auxiliary blower motor switch.
  • Front auxiliary control panel.
  • The panel/floor and cool/warm controls are inoperative using the rear auxiliary climate controls
  • Fuse.
  • Circuitry short/open.
  • Auxiliary blower motor switch.
  • Rear auxiliary control panel.
  • Front auxiliary control panel.
  • Insufficient air conditioning (A/C) cooling
  • Low refrigerant level.
  • A/C cycling switch.
  • Temperature blend door actuator control.
  • A/C pressure cutoff switch.
  • Heater control valve.
  • Vacuum line blocked or leaking.
  • The dual temperature control is inoperative/does not operate correctly
  • Temperature blend door/actuator broken/binding.
  • DATC module.
  • CHECK the temperature blend doors/actuators for a binding or broken condition. If no condition is found, GO to PINPOINT TEST A . If the LH temperature control is not correct diagnose for DTC B2266. If the RH temperature control is not correct diagnose for DTC B2267.
  • The temperature set point does not repeat after turning the ignition switch OFF
  • Open fuse.
  • Circuitry short/open.
  • DATC module.
  • The temperature display will not switch between Celsius and Fahrenheit
  • DATC module.
scientia non olet · About LEMON Manuals