Quick Test 1.0 - Visual Inspection

WARNING: This page is about a different variant/trim than selected.

Carry out the Visual Check and Vehicle Preparation procedures as outlined in the SELF-DIAGNOSTICS - CNG, FLEX-FUEL & GASOLINE .

Inspect the following:

Air cleaner and inlet ducts.
Engine vacuum hoses for damage such as leaks, cracks, blockage, correct routing, etc.
PCM system wiring harnesses for correct connections, bent or broken pins, corrosion, loose wires, correct routing, etc.
PCM, sensors, and actuators for physical damage.
Engine coolant for correct level.
Transmission fluid for correct level and condition.
Non-factory installed items wired into the transmission or PCM harnesses.

Carry out all necessary repairs before continuing with Quick Tests.