Lumbar Motor: Installation

WARNING: This page is about a different car, the 2002 Ford Windstar. However, it is still accessible from the selected car via links, so may be relevant.

Install the lumbar motor.
1. Connect the hose.
2. Position the lumbar motor. Install the pin-type retainers.
  
  Fig 1: Installing Pin-Type Retainers
  Courtesy of FORD MOTOR CO.
Connect the electrical connector.

Fig 2: Connecting Electrical Connector
Courtesy of FORD MOTOR CO.
Install the affected seat. Refer to DRIVER SEAT or PASSENGER SEAT in the Removal and Installation portion of this section.
Repower the SRS. Refer to ACTIVATING SYSTEM .
Check the active restraint system for correct operation.