Section 538 (Evaporative Emissions)
WARNING: This page is about a different car, the 2004 Ford Focus. However, it is still accessible from the selected car via links, so may be relevant.
- Specifications
- Description And Operation
- Diagnosis And Testing
- Evaporative Emissions
- Notes
- Special Tool(s)
- Principles Of Operation
- EVAP Running Loss System Leak Test
- On-Board Refueling Vapor Recovery (ORVR) Evaporative Emission (EVAP) System
- Inspection And Verification
- PCM Diagnostic Trouble Code (DTC) Index
- Symptom Chart
- Pinpoint Tests
- Notes
- Pinpoint Test A: DTC P0442 Small Leak In Evaporative Emission System
- Pinpoint Test B: DTC P0455 Major Leak Or No Flow Detected Or DTC P1443 Very Small Or No Purge Flow Detected In System
- Pinpoint Test C: DTC P1450 Excessive Vacuum Detected In The Fuel Tank
- Pinpoint Test D: Hissing Sound When Removing The Fuel Cap
- Pinpoint Test E: Excessive Fuel Odor
- Pinpoint Test F: Unable To Refuel (ORVR EVAP System Only)
- Evaporative Emissions
- General Procedures
- Removal And Installation
- Evaporative Emission Canister - 2.0L Zetec And 2.0L SPI
- Evaporative Emission Canister - SVT
- Evaporative Emission Canister - 2.3L
- Evaporative Emission Canister Purge Valve - 2.0L Zetec and 2.0L SPI
- Evaporative Emission Canister Purge Valve - SVT
- Evaporative Emission Canister Purge Valve - 2.3L
- Evaporative Emission Canister Vent Solenoid - 2.0L Zetec, 2.0L SPI and SVT
- Evaporative Emission Canister Vent Solenoid - 2.3L
- Fuel Vapor Control Tube Assembly Valve - 2.0L Zetec, 2.0L SPI And SVT
- Fuel Vapor Control Tube Assembly Valve - 2.3L
- Fuel Tank Pressure Sensor - 2.0L Zetec, 2.0L SPI And SVT